Numerical Experiments to Obtain the Scaling Laws for Neutron Yield on Mather-Type Plasma Focus Machines Below 500 Joules

Authors

  • A. Singh INTI International University, 71800 Nilai, Malaysia
  • S. Lee INTI International University, 71800 Nilai, Malaysia; Institute for Plasma Focus Studies, Chadstone, Australia; Universiti Malaya, Kuala Lumpur, Malaysia
  • S. H. Saw INTI International University, 71800 Nilai, Malaysia; Institute for Plasma Focus Studies, Chadstone, Australia

DOI:

https://doi.org/10.3126/kuset.v10i2.63652

Keywords:

Lee‘s model code, Neutron yield, Scaling law, Plasma focus neutron scaling laws

Abstract

In this paper, we explain how we have fitted Lee‘s 5-phase and 6-phase model code to analyze the current waveforms of 6 small plasma focus machines (below 500 Joules) working in deuterium gas medium. Using the information from the code fitted to these current waveforms, the scaling laws for these small-energy machines were obtained as follows:
Yn ~ E02.1 ; Yn ~ Ipeak3.9 ; Yn ~ Ipinch5.0

Downloads

Download data is not yet available.
Abstract
37
PDF
23

Downloads

Published

2014-12-31

How to Cite

Singh, A., Lee, S., & Saw, S. H. (2014). Numerical Experiments to Obtain the Scaling Laws for Neutron Yield on Mather-Type Plasma Focus Machines Below 500 Joules. Kathmandu University Journal of Science, Engineering and Technology, 10(2), 34–41. https://doi.org/10.3126/kuset.v10i2.63652

Issue

Vol. 10 No. 2 (2014)

Section

Original Research Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.