The noise profile and hearing impact of commercial fiberglass reinforced plastic speed boats in Port Blair, Andaman and Nicobar Islands
DOI:
https://doi.org/10.3126/ajms.v14i5.53276Keywords:
Noise-induced hearing loss; Fiber-reinforced plastic; Speedboat, Noise notch; High frequency sloping hearing lossAbstract
Background: Hearing impairment may result from tourism-related vehicle engine noise in Port Blair, Andaman, and Nicobar Islands.
Aims and Objectives: Measure noise levels and test commercial fiberglass-reinforced plastic (FRP) speedboat operators for hearing loss.
Materials and Methods: Hearing loss and noise impacts were checked in a total of 145 male crew members and workers exposed to commercial FRP-speedboat outboard engine noise. 18–50-year-olds with 1–20 years of experience participated. To detect hearing loss, noise-induced hearing loss (NIHL) risk indicators that could appear as a 4 kHz noise notch and the existence of high-frequency sloping hearing loss were detected using pure tone audiometry. The level of noise exposure was measured in conjunction with a questionnaire to assess an individual’s general knowledge of the effects of noise and hearing loss.
Results: A 4 kHz noise notch, some high-frequency slope hearing loss, and an overall hearing loss rate of 42.1% were found in 145 participants. Out of these, 15.9% had the most common bilateral notch. Bilateral high-frequency sloping was 10.3%, Unilateral high-frequency sloping was 4.9%, and unilateral 4 kHz notch was 11.0%. According to the questionnaire, research participants are shockingly unaware of noise-induced hearing loss. The FRP Speedboat outboard engine’s measured noise level ranged from 79.7 to 89.4 dB (A).
Conclusion: The FRP Speedboat crews were at risk of hearing loss, specifically NIHL with continuous noise exposure. High frequency sloping hearing loss, mild to moderate hearing loss, and a substantial 4 kHz noise notch are found in noise-exposed employees. Awareness is needed to prevent irreversible hearing loss.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Asian Journal of Medical Sciences
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- The journal holds copyright and publishes the work under a Creative Commons CC-BY-NC license that permits use, distribution and reprduction in any medium, provided the original work is properly cited and is not used for commercial purposes. The journal should be recognised as the original publisher of this work.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
