Submissions

Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • The submission file is in Microsoft Word, RTF, or WordPerfect document file format.
  • Where available, URLs for the references have been provided.
  • The text is double-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  • The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  • If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.

Author Guidelines

Editorial Policy

Asian Journal of Medical Sciences receives original material of interest to the practitioners and scientists in the field of Medicine related to the recent developments in Medical Sciences. Articles describing original clinical or laboratory investigations and case reports will be considered for publication. From time to time invited articles, editorials and review of selected topics will be published. Manuscripts, including illustrations, tables and figures must be original and not under consideration for publication elsewhere.

Asian Journal of Medical Sciences has agreed to receive manuscripts in accordance with the "Uniform Requirements for Manuscripts Submitted to Biomedical Journals," as cited in N. Engl. J. Med., 1997, 336: 309-15. The Uniform Requirements for Manuscripts Submitted to Biomedical Journals: Writing and Editing for Biomedical Publication, Updated October 2008, can be obtained from the website http://www.icmje.org

Manuscript Submission
All manuscripts should be accompanied by a covering letter from the author responsible for correspondence regarding the manuscript. Mention submission type in your cover letter. The covering letter should contain the following copyright disclosure statement.

"Upon acceptance by Asian Journal of Medical Sciences, all copyright ownership for the article is transferred to Asian Journal of Medical Sciences. We, the undersigned co-authors of this article, have contributed significantly to and share in the responsibility for above. The undersigned stipulate that the material submitted to Asian Journal of Medical Sciences is new, original and has not been submitted to another publication for concurrent consideration.

We also attest that any human and /or animal studies undertaken as part of the research from which this manuscript was derived are in compliance with regulation of our institution(s) and with generally accepted guidelines governing such work.

We further attest that we have herein disclosed any and all financial or other relationships which could be construed as a conflict of interest and that all sources of financial support for this study have been disclosed and are indicated in the acknowledgement. This statement must be signed by all the major co-authors."

The covering letter should also contain statement that the manuscript has been seen and approved by all authors and should give any additional information which may be helpful to the Editor. If there has been any prior publication of any part of the work, this should be acknowledged and appropriate written permission included.

We accept manuscript in the following sections:

Short communications
Current research trends
Original research
Case reports
Review articles
Letter to editor

Review Procedure
Submitted manuscripts are reviewed for originality, significance, adequacy of documentation, reader interest and composition.

Manuscript not submitted according to instructions will be returned to the author for correction prior to beginning the peer review/process. Revised manuscripts are judged on the adequacy of responses to suggestions and criticisms made during the initial review.

All accepted manuscripts are subject to editing for scientific accuracy and clarity by the office of the Editor.

A. General Requirements
Manuscript must be written in English. Whenever there is any doubt, authors should seek the assistance of experienced, English-speaking medical editors. A medical editor should review the final draft of the original and any revision of the manuscript.

Type the manuscript on A4 size with margins of at least 1.5 inches (4 cm) all over the page. Text should be type in double spacing in every page. Begin each of the following section on separate page and in the following order: title page, abstract, introduction, materials/subjects/patients and methods, results, discussion, acknowledgements, references, tables and figures (each on a separate page) and legends. Number pages consecutively, beginning with the title page. Type the page number in the upper right-hand corner of each page.

B. Title Page
The title page of the manuscript should include: (1) concise and informative title (less than 200 characters); (2) complete by line, with first, middle initial and last name of each author up to ten authors may be cited; (3) complete affiliation for each author, with the name of department (s) and institution (s) to which the work should be attributed; (4) disclaimer, if any; (5) name, address and telephone number and email address (necessary) of one author responsible for correspondence about the manuscript; (6) name and address of author to whom reprint request should be directed, (7) source(s) of support in the form of grants equipment, drugs, or all of these; (8) word count.

C. Abstracts
Provide on a separate page a structured abstract of not more than 250 words for original article and an unstructured abstract of no more than 150 words for other submission types. The structured abstract should consist of four paragraphs, labeled Objective, Methods, Results and Conclusion. They should briefly describe, respectively, the problem being addressed in the study, how the study was performed, the salient result and what the authors conclude from the results. The unstructured abstract is in the form of one paragraph covering these headings.

D. Introduction
State the purpose of the article and summarize the rationale for the study or observation. Give only strictly pertinent references and do not include data or conclusions from the work being reported. Clearly mention the objective(s) of the study in this section without adding any sub-heading.

E. Materials & Methods
Describe your selection of the observational or experimental subjects (patients or laboratory animals, including controls) clearly identify the age, sex and other important characteristics of the subjects. The definition and relevance of race and ethnicity are ambiguous. Authors should be particularly careful about using these categories.

Identify the methods, apparatus (give the manufacturer's name and address in parenthesis) and procedures in sufficient detail to allow other workers to reproduce the results. Mention setting, study design, sampling method, sample size, inclusion/exclusion criteria wherever applicable without adding any sub-headings. Give references to established methods if necessary, provide references and brief descriptions for methods that have been published but are not well known; describe new or substantially modified methods, give reasons for using them and evaluate their limitations. Identify precisely all drugs and chemicals used, including generic name(s), dose(s) and route(s) of administration.

Reports of randomized clinical trials should present information on all major study elements including the protocol (study population, interventions or exposures, outcomes and the rationale for statistical analysis), assignment of interventions (methods of randomization, concealment of allocation to treatment groups) and the method of masking (blinding).

Authors submitting review manuscripts should include a section describing the methods used for locating, selecting, extracting and synthesizing data. These methods should also be summarized in the abstract.

F. Ethics
When reporting experiments on human subjects, indicate whether the procedures followed were in accordance with the ethical standards of the responsible committee on human experimentation (institutional or regional) and with the Helsinki Declaration of 1975, as revised in 1983. Do not use patients' names, initials, or hospital numbers, especially in illustrative material. When reporting experiments on animals, indicate whether the institutions or a national research councils guide for or any national law on the care and use of laboratory animals was followed.

G. Statistics
Describe statistical methods with enough detail to enable a knowledgeable reader with access to the original data to verify the reported results. When possible, quantify findings and present them with appropriate indicators of measurements error or uncertainty (such as standard deviation when mentioning mean values of quantitative variables, or confidence intervals where odds ratio is mentioned, etc.). Mention the statistical test used for analysis to obtain the P values. Discuss the eligibility of experimental subjects. Give details about randomization. Describe the method for and success of any blinding of observations. Report complications of treatment. Give numbers of observations. Report losses to observation (such as dropouts from a clinical trial). References (if necessary) for the design of the study and statistical methods should be to standard works when possible (with pages stated) rather than to papers in which the designs or methods were originally reported. Specify any general use computer programs used.

Include a general description of methods in the methods section. When data are summarized in the results section, specify the statistical methods used to analyze them. Restrict tables and figures to those needed to explain the argument of the paper and to assess its support. Use graphs as an alternative to tables with many entries; do not duplicate data in graphs and tables. Avoid non-technical uses of technical terms in statistics, such as "random", (which implies a randomizing device), "normal", "significant", "correlations" and "samples". Define statistical terms, abbreviations and most symbols.

H. Results
Present your results in logical sequence in the text, tables and illustrations. Do not repeat in the text all data in the tables or illustrations. Emphasize or summarize important observations.

I. Discussion
Emphasize the new and important aspects of the study and conclusions that follow from them. Do not repeat in detail data or other material given in the introduction or the results section. Include in discussion section the implications of the findings and their limitations including implications for future research. Relate the observations to other relevant studies.

Link the conclusions with the goals of the study but avoid unqualified statements and conclusions not completely supported by data. In particular, authors should avoid making statements on economic benefits and costs unless their manuscript includes economics data and analyses. Avoid claiming priority and alluding to work that has not been completed.

J. Acknowledgements
Persons who have contributed intellectually to the paper but whose contributions do not justify authorship may be named and the function or contribution is described - for example, "scientific advisor critical review of study proposal, "data collection," or "participation in clinical trial". Such persons must have given their permission to be named. Authors are responsible for obtaining written permission from person acknowledged by name, because readers may infer their endorsement of the data and conclusions. Technical help should be acknowledged in a paragraph separate from those acknowledging other contributions.

K. References
References should be cited in consecutive numerical order at first mentioned in the text and designated by the reference number in parenthesis. References appearing in a table or figure should be numbered sequentially with those in text.

The reference list must be typed double spaced and numbers consecutively, as in the text. The Journal follows Index Medicus style for references and abbreviated journal names according to the list of Journals indexed in Index Medicus. "Unpublished observations" and "personal communications" should not be used as references, although written-not verbal-communications may be noted as such in the text. References cited as "in press" must have been accepted and not merely in preparation or submitted. The author is responsible for the accuracy of all references and must verify them against the original document.

For journal articles, list the first six authors, et al.

Hasan K, Bulhan K P, Zafar A, et al. Acute leukemia in children. French-American-British (FAB) classification and its relation to clinical features. J Pak Med Assoc 1992; 4:229-31.

For books and book chapters, follow the examples below:

DeGroot IJ. Evaluation of thyroid function and thyroid disease. In: DeGroot L, Stanbury J B, eds. The thyroid and its diseases. 4th ed. New York: Wiley, 1975, pp 196-248.

Dupont B. Bone marrow transplantation in severe combined immunodeficiency with an unrelated MLC compatible donor. In: White H J Smith R, eds. Proceeding of the third annual meeting of the International Experimental Hematology. Houston: International Society for Experimental Hematology, 1974, pp 44-46.

In Press
Leshner AI. Molecular mechanisms of cocaine addiction. N EngI J Med. In press 1996.

Journal article in electronic form
Morse SS. Factors in the emergence of infectious diseases. Emerg Infect Dis [serial online] 1995 Jan-Mar [cited 1996 Jun 5], Computerized Educational Systems, 1993.

Monograph in electronic form
CDI, clinical dermatology illustrated [monographs on CD-ROM] Reeves JRT, Maibach H. CMEA Multimedia group, producers 2nd ed. Version 2.0. San Diego: CMEA, 1995.

Conference proceedings
Kimura J, Shibasaki H, editors. Recent advances in clinical neurophysiology. Proceedings of the 10th International Congress of EMG and Clinical Neurophysiology, 1995 Oct 15-19, Kyoto, Japan. Amsterdam: Elsevier, 1996.

Dissertation
Kaplan SJ. Post-hospital home health care the elderly's access and utilization [dissertation]. St. Louis (MO): Washington Univ., 1995.

Volume with supplement
Shen HM, Zhang QF. Risk assessment of nickel carcinogenicity and occupational lung cancer. Environ Health Perspect, 1994; 102 Suppl 1:275-82.

World Wide Web page
Beckleheimer J. How do you cite URL's in a bibliography? [online] 1994 [ cited 2000 Dec 13]. Available from: URL:http://www.nrlssc.navy.mil/meta/bibliography.html

World Wide Web page (no author)
Educating America for the 21st century: Developing a strategic plan for educational leadership [online] 1994 [cited 1999 May 15]. Available from:

URL: http://www.ilt.columbia.edu/CONF/Edplan.html

World Wide Web Home page
Curtin University of Technology. [Homepage of the Curtin University of Technology] [online] 2000 May 22 last update. [cited 2000 Jun 12].

Available from: URL: http://www.curtin.edu.au/

Abbreviations and Symbols
With the exception of units of measurement, Journal discourages the use of abbreviations, for additional information on proper medical abbreviation, consult the CBE style Manual, Fifth Edition (Bethesda, MD Council of Biology Editions, 1983). When an abbreviation is used, it should be preceded by the full word or name of the item being abbreviated.

Drug Names
Generic names should generally be used. When proprietary brands are used in research, include the brand name in parentheses in the methods section (this needs to be taken from CPSP hand out)

L. Tables
Type each table double-spaced on a separate page. Do not submit tables as photographs. Tables should be self-explanatory and should supplement, not duplicate the text. Each table must be cited in consecutive numerical order in the text. Number the tables consecutively with an Arabic number following the word Table. The titles should be descriptive, brief and typed centered in upper and title, column headings and at the end of the table. Do not use vertical lines. Give each column a short or abbreviated heading.

Place explanatory matter in footnotes not in heading. Use the following symbols in this sequence *,+,++,#,**. Expand in the footnote all non-standard abbreviations used in each table. For footnotes, identify statistical measures of variations, such as standard deviation and standard error of the mean. If data from another published source are used, obtain written permission from the publisher of the original source and acknowledge fully. If data from an unpublished source are used, obtain permission from the principal investigator and acknowledge fully.

M. Illustrations
Illustrations should clarify and augment the text. The selection of sharp, high-quality illustrations is of paramount importance. Figures of inferior quality will be returned to the author for correction or replacement.

Submit two complete sets of glossy illustrations, no smaller than 3-1/2x5 inches nor larger than 8x10 inches. Do not send original artwork. Glossy photographs of line drawings rendered professionally on white drawing paper in black India ink, with template or typeset lettering, should be submitted. No hand drawn or typewritten art will be accepted. Letters, number and symbols (typeset or template) must be clear and of sufficient size to retain legibility after reduction.

Each illustration must be numbered and cited in consecutive order in the text. Illustrations should be identified on a gummed label affixed to the back of each illustration and containing the following information: figure number, part of figure (if more than one) and designation of "top".

Colour illustrations will be considered for publication, but the author is responsible for all charges relating to separations and printing. An estimate of these charges will be sent to the author at the time of production. Authors' approval of charges is required before printing. Three complete sets of glossy colour photographs (not transparencies) must be submitted for review. Polaroid prints are not acceptable.

All submitted illustrations become the property of Asian Journal of Medical Sciences and will not be returned unless the manuscript is rejected.

Legends for Illustrations
Legends for illustrations should be concise and should not repeat the text. Legends should be typed double-spaced on a separate page. Each figure should be cited in consecutive numerical order in the text. Give the figures a number following the word Figure. Use letters to designate parts of illustrations (e g, A, B, C) and describe each part clearly in the legend. Any letter designations or arrows appearing on the illustration should be identified and described fully.

Originally (not previously published) illustrations are preferred for publication in the Journal; however, if illustrations have been published previously, authors are responsible for obtaining written permission from the publisher to reprint. The source of the original material must be cited in the references and the following credit line included in the legend (reprinted by permission of Ref. X). All permission release must be submitted to the Editor at the time of manuscript submission.

Style for preparation of manuscripts - The first page of authors information and abstract should be strictly followed for all Original Articles 

Title:

Diagnostic Accuracy of F18-Fluorodeoxyglucose Positron Emission Tomography-Computed Tomography in the Evaluation of Carcinoma of Unknown Primary; Single center study

Authors and Affiliations:

Umal Baneen Zahra1 Muhammad Numair Younis2 Sheikh Danial Hanan1 Humaira Rauf1 Rimsha Badar1 Nefal Numair3 Abubaker Shahid4

1 Associate Professor, Fatima Memorial Hospital, Department of Allied Health Science Lahore, Punjab, PK

2 Assistant Professor, Institute of Nuclear Medicine and Oncology, INMOL, Nuclear Medicine Department, Lahore, Punjab, PK

3 Professor, Shaikh Khalifa Bin Zayed Al Nahyan Medical and Dental College Lahore, Punjab, PK

4 Research Associate, Institute of Nuclear Medicine and Oncology (INMOL) Lahore, Pakistan, Department of Clinical Oncology, Lahore, Punjab, PK

Corresponding Author:

Dr. Muhammad Numair Younis

Assistant Professor, Institute of Nuclear Medicine and Oncology INMOL Cancer Hospital Lahore, Pakistan

Mobile No: +92334353533

E-mail: dr.numair@gmail.com

Running Title: Diagnostic Accuracy of F18-Flurodeoxyglucose Positron Emission Tomography-Computed Tomography in the Evaluation of Carcinoma of Unknown Primary; Single centre study

ORCID ID:

Umal Baneen Zahra- https://orcid.org/0000-0001-9814-6785

Muhammad Numair Younis- https://orcid.org/0000-0002-3853-8805

Sheikh Danial Hanan- https://orcid.org/0000-0001-7500-4768 2

Humaira Rauf- https://orcid.org/0000-0001-8119-9952

Rimsha Badar- https://orcid.org/0000-0002-8211-5682

Nefal Numair- https://orcid.org/0000-0002-1976-9325

Abubaker Shahid- https://orcid.org/0000-0003-1916-629X

Work Attributed to: Institute of Nuclear Medicine and Oncology INMOL Cancer Hospital Lahore, Pakistan

Author’s Contribution:

UBZ- Definition of intellectual content, Literature survey, Prepared first draft of manuscript, implementation of study protocol, data collection, data analysis, manuscript preparation and submission of article; MNY- Concept, design, clinical protocol, manuscript preparation, editing, and manuscript revision; SDH- Design of study, statistical Analysis and Interpretation; HR- Review Manuscript; RB- Review Manuscript; NN- Literature survey and preparation of Figures; AS- Coordination and Manuscript revision

Conflict of interest: No! Conflict of interest is found elsewhere considering this work. Source of Funding: There was no financial support concerning this work. 3

Abstract:

Background: The term carcinoma of unknown primary (CUP) is not a single disease entity it can be explicated as the recognition of metastasised tumor in which the primary origin of the malignancy from an organ or site remains occult. The term refers to a clinical disorder that revolves around and represents a diversified metastatic tumor group for whom the diagnostic investigations are unable to pinpoint the primary site of the tumor, comprising of extensive radiological techniques, invasive endoscopic procedures and histopathology, many which fail to diagnose the primary site

Aims and Objective: The study was conducted to ascertain the diagnostic accuracy of F18-Fluorodeoxyglucose Positron Emission Tomography-Computed Tomography in the evaluation of carcinoma of unknown primary. The secondary objective of the study was to identify rate of primary malignancies localized on FDG PET-CT that present as carcinoma of unknown primary in local settings.

Materials and Methods: The retrospective, cross-sectional study included patients with CUP syndrome who underwent 18F FDG PET-CT scans between October 2021 and February 2022. The primary site localized on 18F FDG PET-CT was confirmed through biopsy and histology.

Results: Of a total of 63 patients, 57.1% were males while 42.9% were females with a mean age of 56.27 years. The overall detection rate of primary tumor site on 18F FDG PET-CT was 88.8%. Abnormal sites, indicative of primary malignant tumor were correctly detected in 79.36% that were truly positive proven on biopsy. False negative rate of scan was 4.76% though malignancy was proven through other investigations or follow up. While 6.36% had true negative and 9.52% showed false positive results on the scan. In this study, the calculated diagnostic accuracy of 18F FDG PET-CT identified as 85.7%, sensitivity 94%, specificity 40%, positive predictive value 89.2%, and negative predictive value 57.1%.

Conclusion: 18F FDG PET-CT demonstrated high sensitivity and diagnostic accuracy ascertaining the primary tumor site in patients with CUP in our study population.

Key-words: Carcinoma of unknown primary, Positron Emission Tomography, FDG PET, Diagnostic Accuracy

( For Case Series and Case Reports- Abstracts should be unstructured)

Submission Format

Review article: maximum 4000 words excluding title page and an unstructured abstract of 150 words and references with no more than five tables or figures and 35 references.

Original article: maximum 3000 words excluding title page and a structured abstract of 250 words and references with no more than three tables or figures and 25 references Short Reports / Short Communications / Special Communications / Case reports: maximum 1250 words excluding title page and an unstructured abstract of 150 words and references with no more than two tables or figures and 10 references. It should not be signed by more than six authors

Case Report: Abstract; Introduction; Case Report; Discussion and Conclusion.

Short Report: Abstract; Introduction; Patients Methods and Result; and Conclusion.

Special Communication: Abstract; Introduction; Methods and Result; and Conclusion.

Letters to the Editor: maximum 250 words if it is in reference to a recent journal article, or 400 words in all other cases. It must have no more than five references and one figure or table. It must not be signed by more than three authors. Letters referring to a recent journal article must be received within four weeks of its publication.

Original double-spaced typed manuscript. Mention type of submission in your cover letter with a word count.

Title page with title, authors' names and complete affiliations; corresponding author, complete address, telephone number and email address (necessary), author for reprint requests and complete address.

References in consecutive numerical order. Reference list typed double space.

Figures and Tables in consecutive numerical order.

Legends for all figures typed double spaced.

Consent forms for patient photographs.

Written permission from the publisher to reprint previously published figures and tables.

Publication Frequency

AJMS will be publishing twelve issues/ year from 2021 onwards.

Publication Time

Usually it takes around twenty weeks from submission to publication of submitted article, after review and acceptance.

Article Publication Charges

There is no processing charges. Once the article is accepted, the authors would be asked to process the APC. The APC for SAARC countries authors is USD 200$ and for others it is USD 250$.

Refund Policy

Once the article is accepted after peer review, and if the authors withdraws the article at this stage, they would be refunded back only 70% of the APC. 

No refunds would be given once the article is processed.

Plagiarism Policy:

  1. The Journal follows the authorship guidelines of the International Committee of Medical Journal Editors (ICMJE) (http://www.icmje.org/).
  2. The Journal follows the standard international definition of plagiarism and according to the guidelines provided by the United States Education foundation in Nepal. (http://www.usefnepal.org/opportunity/plagiarism.php) (http://www.presscouncilnepal.org/codeofconduct.php)
  3. The Journal assigns equal responsibility of intellectual integrity of the manuscript to all authors whose names appear on the manuscript/article. When submitting a manuscript, the Journal requires that all authors sign a statement accepting this responsibility.
  4. This statement must indicate that no part of the manuscript has been plagiarized.
  5. Any such material should be made accessible to the Editor and should only be used with referencing according to the guidelines of authorship. This may otherwise form the basis of a redundant publication/duplicate publication/"salami slicing" and appropriate action may be taken by the Editor which may range from rejection of the manuscript to debarment of the authors(s) from further publication in the Journal.
  6. It is emphasized that the Journal considers self plagiarism as equally unethical as plagiarism in any other form. If material is to be used from the authors previous work, standard referencing guidelines must be followed.
  7. All manuscripts submitted to the Journal will be checked for plagiarism. If a manuscript submitted for publication (or a manuscript accepted for publication or an article that has already been published in the Journal) is found to be based on plagiarized material, the Editor will be obliged to write to the author(s) seeking an explanation. The corresponding author will be required to respond with an explanation within 30 days of receiving the letter from the editor.
    Crossref Similarity Check logo
  8. Any such manuscript for review will be held up till the matter is resolved.
  9. After receiving the author's explanation, if considered necessary, the Editor may also send a letter of information to the Head of the Institution or any other relevant authority at the author(s) institution.
  10. In case an acceptable explanation is provided by the author(s), the Editor may recommend appropriate changes after which the review process for the submitted manuscript may commence.
  11. In case of failure of author(s) to either respond within the stipulated time, or in case they are unable to provide a suitable explanation, the Editor will convene a meeting of the Plagiarism Committee of the Board of Editors of the Journal to consider further action.
  12. Further action will depend upon the nature of the offence and may include rejection of the manuscript from publication along with possible debarment of the author(s) from further publishing in the Journal. The period of debarment will depend upon the nature of the offence and may range from a period of a few months to permanent.
  13. Information regarding this action may be published in the forth coming issue of the Journal on a numbered page.

Plagiarism, if detected and proved, would be considered a punishable offence.

Immediate and unbiased action will be taken by the Plagiarism Committee.

AJMS Plagiarism Committee Members:

Dr. Arun Kumar - Editor-in-Chief

Dr. Balkishan Sharma 

Members of Editorial Board

Authorization letter / copyright disclosure statement

All authors and co-authors should sign the following disclosure statement, by virtue of which they are responsible for the content of the article and giving all copyrights to the Asian Journal of Medical Sciences

Upon acceptance by Asian Journal of Medical Sciences, all copyright ownership for the article is transferred to the Asian Journal of Medical Sciences. We, the undersigned, principal author and co-authors of this article, have contributed significantly to and share in the responsibility for above. The undersigned stipulate that the material submitted to Journal of the Asian Journal of Medical Sciences is new, original and has not been submitted to another publication for concurrent consideration.

The undersigned also declare that no unfair or unethical means have been employed to produce this manuscript and that no part of the submission has been plagiarized in any form. We also submit that we are aware of the AJMS Plagiarism Policy which we have read on the Journal website and are in total compliance with it.

We also attest that any human and /or animal studies undertaken as part of the research from which this manuscript was derived, are in compliance with regulation of our institution(s) and with generally accepted guidelines governing such work.

We further attest that we have herein disclosed any and all financial or other relationships which could be construed as a conflict of interest and that all sources of financial support for this study have been disclosed and are indicated in the acknowledgement.

Editorials

This section is closed only for Editorial Board Members of the journal. Time to time we shall be publishing Editorials which can be submitted ONLY from members of Editorial Board

Privacy Statement

Nepal Journals Online (NepJOL) is a member of the Ubiquity Partner Network coordinated by Ubiquity Press. According to the EU definitions, NepJOL is the data controller, and Ubiquity Press are the service providers and data processors. Ubiquity Press provide the technical platform and some publishing services to NepJOL and operate under the principle of data minimisation where only the minimal amount of personal data that is required to carry out a task is obtained.

More information on the type of data that is required can be found in Ubiquity Press’ privacy policy below.

Ubiquity Press Privacy Policy

We take seriously our duty to process your personal data in a fair and transparent way. We collect and manage user data according to the following Privacy Policy. This document is part of our Terms of Service, and by using the press portal, affiliated journals, book, conference and repository websites (the “Websites”), you agree to the terms of this Privacy Policy and the Terms of Service. Please read the Terms of Service in their entirety, and refer to those for definitions and contacts.

What type of personal data do we handle?

There are four main categories of personal data stored by our journal platform, our press platform, and our book management system; Website User data, Author data, Reviewer data and Editor data.

The minimum personal data that are stored are:

  • full name
  • email address
  • affiliation (department, and institution)
  • country of residence

Optionally, the user can provide:

  • salutation
  • gender
  • associated URL
  • phone number
  • fax number
  • reviewing interests
  • mailing address
  • ORCiD
  • a short biography
  • interests
  • Twitter profile
  • LinkedIn profile
  • ImpactStory profile
  • profile picture

The data subjects have complete control of this data through their profile, and can request for it to be removed by contacting info@ubiquitypress.com

What do we do to keep that data secure?

We regularly backup our databases, and we use reliable cloud service providers (Amazon, Google Cloud, Linode) to ensure they are kept securely. Backups are regularly rotated and the old data is permanently deleted. We have a clear internal data handling policy, restricting access to the data and backups to key employees only. In case of a data breach, we will report the breach to the affected users, and to the press/journal contacts within 72 hours.

How do we use the data?

Personal information is only used to deliver the services provided by the publisher. Personal data is not shared externally except for author names, affiliations, emails, and links to ORCiD and social media accounts (if provided) in published articles and books which are displayed as part of the article/book and shared externally to indexes and databases. If a journal operates under open peer review then the reviewer details are published alongside the reviewer details.

How we collect and use your data:

1. When using the website

1.1 what data we collect

  • When you browse our website, we collect anonymised data about your use of the website; for example, we collect information about which pages you view, which files you download, what browser you are using, and when you were using the site.
  • When you comment on an article or book using Disqus, we are not collecting, controlling or processing the data. More details on the DISQUS privacy policy can be found on their website.
  • When you annotate an article or book, this is done via a 3rd party plugin to the website called Hypothes.is. In using this plugin we are not collecting, controlling or processing the data. More details on the Hypothes.is privacy policy can be found on their website.

1.2 why we collect the data

  • We use anonymised website usage data to monitor traffic, help fix bugs, and see overall patterns that inform future redesigns of the website, and provide reports on how frequently the publications on our site have been accessed from within their IP ranges.

1.3 what we do (and don’t do) with the data

  • We do not collect personal information that can be used to identify you when you browse the website.
  • We currently use Google Analytics for publication reports, and to improve the website and services through traffic analysis, but no personal identifying data is shared with Google (for example your computer’s IP is anonymised before transmission).

1.4 what to do if you want to get a copy of your data, or want your data to be removed

  • Please contact info@ubiquitypress.com to request a copy of your data, or for your data to be removed/anonymised.

2. When registering as an author, and submitting an article or book

2.1 what data we collect

  • When registering an account we ask you to log in and provide certain personal information (such as your name and email address), and there is the option to register using an ORCiD which will pre-fill the registration form.
  • As part of submitting an article for publication, you will need to provide personally identifying information which will be used for the peer review process, and will be published. This can include ‘Affiliation’, ‘Competing interests’, ‘Acknowledgements’.

2.2 why we collect the data

  • Registering an account allows you to log in, manage your profile, and participate as an author/reviewer/editor. We use cookies and session information to streamline your use of the website (for example in order for you to remain logged-in when you return to a journal). You can block or delete cookies and still be able to use the websites, although if you do you will then need to enter your username and password to login. In order to take advantage of certain features of the websites, you may also choose to provide us with other personal information, such as your ORCiD, but your decision to utilize these features and provide such data will always be voluntary.
  • Personal data submitted with the article or book is collected to allow follow good publication ethics during the review process, and will form part of the official published record in order for the provenance of the work to be established, and for the work to be correctly attributed.

2.3 what we do (and don’t do) with the data

  • We do not share your personal information with third parties, other than as part of providing the publishing service.
  • As a registered author in the system you may be contacted by the journal editor to submit another article.
  • Any books published on the platform are freely available to download from the publisher website in PDF, EPUB and MOBI formats on the publisher’s site.
  • Any personal data accompanying an article or a book (that will have been added by the submitting author) is published alongside it. The published data includes the names, affiliations and email addresses of all authors.
  • Any articles published on the platform are freely available to download from the publisher website in various formats (e.g. PDF, XML).
  • Ubiquity Press books and articles are typeset by SiliconChips and Diacritech.This process involves them receiving the book and book associated metadata and contacting the authors to finalise the layout. Ubiquity Press work with these suppliers to ensure that personal data is only used for the purposes of typesetting and proofing.
  • For physical purchases of books on the platform Ubiquity Press use print on demand services via Lightning Source who are responsible for printing and distribution via retailers. (For example; Amazon, Book Repository, Waterstones). Lightning Source’s privacy policy and details on data handling can be found on their website.

2.4 why we store the data

  • We store the account data so that you may choose to become a reviewer and be able to perform those tasks, or to become an author and submit an article and then track progress of that article.
  • Published personal data that accompanies an article or a book forms part of the official published record in order for the provenance of the work to be established, and for the work to be correctly attributed.

2.5 what to do if you want to get a copy of your data, or want your data to be removed

  • You are able to view, change and remove your data associated with your profile. Should you choose to completely delete your account, please contact us at support@ubiquitypress.com and we will follow up with your request as soon as possible.
  • To conform to publication ethics and best practice any personal data that is published alongside an article or book cannot be removed. If you have a query about a publication to which you are attributed please contact info@ubiquitypress.com

3. When registering as a reviewer

3.1 what data we collect

  • To become a reviewer you must first register as a user on the website, and set your preference that you would like to be considered as a reviewer. No new personal data is collected when a registered user elects to become a reviewer.
  • When registering an account we ask you to log in and provide certain personal information (such as your name and email address), and there is the option to register using an ORCiD which will pre-fill the registration form.
  • Reviewers can also be registered by editors who invite them to review a specific article. This requires the editor to provide the reviewer’s First Name, Last Name, and Email address. Normally this will be done as part of the process of inviting you to review the article or book.
  • On submitting a review, the reviewer includes a competing interest statement, they may answer questions about the quality of the article, and they will submit their recommendation.

3.2 why we collect the data

  • The data entered is used to invite the reviewer to peer review the article or book, and to contact the reviewer during and the review process.
  • If you submit a review then the details of your review, including your recommendation, your responses to any review form, your free-form responses, your competing interests statement, and any cover letter are recorded.

3.3 what we do (and don’t do) with the data

  • This data is not shared publicly and is only accessible by the Editor and system administrators of that journal or press.
  • The data will only be used in connection with that journal or press.
  • Data that is retained post final decision is kept to conform to publication ethics and best practice, to provide evidence of peer review, and to resolve any disputes relating to the peer review of the article or book.
  • For journals or presses that publish the peer reviews, you will be asked to give consent to your review being published, and a subset of the data you have submitted will become part of the published record.

3.4 what to do if you want to get a copy of your data, or want your data to be removed

  • If you would no longer like to be registered as a reviewer you can edit your profile and tick the box ‘stop being a reviewer’. This will remove you from the reviewer database, however any existing reviews you may have carried out will remain.
  • If you have been contacted by an editor to peer review an article this means that you have been registered in the system. If you would not like to be contacted for peer review you can reply to the email requesting that your data be deleted.

4. When being registered as a co-author

4.1 what data we collect

  • Co-author data is entered by the submitting author. The submitting author will already have a user account. According to standard publishing practice, the submitting author is responsible for obtaining the consent of their co-authors to be included (including having their personal data included) in the article/book being submitted to the journal/press.
  • The requested personal data for co-authors are at the bare minimum; first name, last name, institution, country, email address. This can also include; ORCID ID, Title, Middle Name, Biographical Statement, Department, Twitter Handle, Linkedin Profile Name or ImpactStory ID.

4.2 why we collect the data

  • Assuming that it is accepted for publication, this data forms part of the official published record in order for the provenance of the work to be established, and for the work to be correctly attributed.
  • Author names, affiliations and emails are required for publication and will become part of the permanent cited record.

4.3 what we do (and don’t do) with the data

  • The co-author’s personal data is stored in the author database. This personal data is only used in relation to the publication of the associated article.
  • Any co-author data collected is added to the author database and is only used in association with the article the user is co-author on.

4.5 what to do if you want to get a copy of your data, or want your data to be removed

  • To receive a copy of your data, please contact info@ubiquitypress.com
  • To conform to publication ethics and best practice any personal data that is published alongside an article or book cannot be removed. If you have a query about a publication to which you are attributed please contact info@ubiquitypress.com

5. When signing-up to receive newsletters

5.1 what data we collect

  • We require you to include your name and email address

5.2 why we collect and store the data, and for how long

  • This data would be collected to keep you updated with any news about the platform or specific journal

5.3 what we do (and don’t do) with the data

  • We use mailchimp to provide our mailing list services. Their privacy policy can be found here

5.4 what to do if you want to get a copy of your data or want your data to be removed

  • All emails sent via our newsletter client will include a link that will allow you to unsubscribe from the mailing list

Notification about change of ownership or of control of data

We may choose to buy or sell assets. In the case that control of data changes to or from Ubiquity Press and a third party, or in the case of change of ownership of Ubiquity Press or of part of the business where the control of personal data is transferred, we will do our best to inform all affected users and present the options.

(Updated: 18 May 2018)