Energy intensity improvement potential of the commercial buildings in developing countries: A case study of Nepal

Authors

  • Shree Raj Shakya Institute of Engineering, Tribhuvan University
  • Janu Kumar Sah Department of Mechanical and Aerospace Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University
  • Puja Bhujel Department of Mechanical and Aerospace Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University
  • Hricha Aryal Department of Mechanical and Aerospace Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University
  • Tri Ratna Bajracharya Research Institute for Sustainability (RIFS), Helmholtz Centre Potsdam
  • Ramchandra Bhandari Institute for Technology and Resources Management in the Tropics and Subtropics, TH Köln (University of Applied Sciences), Betzdorfer Strasse 2, 50679 Cologne, Germany
  • Subarna Subedi Department of Mechanical and Aerospace Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University
  • Bibish Chaulagain Department of Mechanical and Aerospace Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University

DOI:

https://doi.org/10.3126/jiee.v7i1.68120

Keywords:

Energy audit, Building energy system, Commercial sector, Energy intensity, Energy efficiency, Building simulation

Abstract

The need for building-related energy is increasing, mostly in developing countries where urbanization is taking place rapidly with ever-increasing demand in commercial and public services. Globally, energy efficiency is emphasized as a key strategy for addressing rising energy demand and decoupling energy from economic growth. In order to assess the existing status and potential for energy savings in developing nations like Nepal, we compared the energy intensity with and without biomass among Nepal, India, China, and Germany during 2000–2020. This study uses the typical service sector building, as case study, to examine the potential for building energy savings using various passive and active solutions. It explores the various energy efficient measures by simulating the building's energy system with OpenStudio-EnergyPlus. The bioclimatic chart was used to analyze climate factors and passive design strategies. The questionnaire survey was conducted with the occupants of the building. This study has identified energy-saving opportunities and their economic viability. Finally, the energy use intensity (EUI) of the project site was evaluated. The study's findings and methodologies used can be emulated during development of national standards for commercial buildings for Nepal and other countries promoting building energy efficiency.

Downloads

Download data is not yet available.
Abstract
49
PDF
33

Downloads

Published

2024-12-30

How to Cite

Shakya, S. R., Sah, J. K., Bhujel, P., Aryal, H., Bajracharya, T. R., Bhandari, R., … Chaulagain, B. (2024). Energy intensity improvement potential of the commercial buildings in developing countries: A case study of Nepal. Journal of Innovations in Engineering Education, 7(1), 84–95. https://doi.org/10.3126/jiee.v7i1.68120

Issue

Section

Articles