Comparison of Tunnel Construction Cycle with NTNU Model for the Headrace Tunnel of Seti Khola Hydropower Project

Authors

  • Rukshana Shrestha Rock and Tunnel Engineering Department of Civil Engineering, IOE, Pashchimanchal Campus, Tribhuvan University, Nepal
  • Krishna Kanta Panthi Department of Geoscience and Petroleum, Norwegian University of Science and Technology, Norway
  • Ghan Bahadur Shrestha Department of Civil Engineering, IOE Pashchimanchal Campus, Tribhuvan University, Nepal

DOI:

https://doi.org/10.3126/jes2.v2i1.60371

Keywords:

Blasting Pattern, Drill-holes, Specific Charge, Specific Drilling

Abstract

Achieving smooth and efficient blasting of tunnel walls is a challenging task. Tunneling performance and advancement can best be performed with proper and effective blasting techniques in drill and blast techniques. In this manuscript, the Seti Khola hydropower project's headrace tunnel's real-time statistics are used to compare the overall performance of tunnel excavation for the widely used blasting approach. The headrace tunnel's 663 meters of observed and recorded length comprises rocks with weak to medium blastibility. According to the Q-system, this tunnel section's rock mass quality class ranges from good to bad. The rock type found has a monotonous sequence of metasandstone and phyllite with quartz partings and discontinuities filled with clay to silt. A variation in the excavation cycle is observed in relation to the presence of different rock mass classes. Ultimately, the NTNU model is compared and analysis is done on the drilling patterns and cycles of tunnel building. It was discovered that using the NTNU model for tunnel excavation presents a significant opportunity to enhance performance.

Downloads

Download data is not yet available.
Abstract
115
PDF
142

Downloads

Published

2023-12-06

How to Cite

Shrestha, R., Panthi, K. K., & Shrestha, G. B. (2023). Comparison of Tunnel Construction Cycle with NTNU Model for the Headrace Tunnel of Seti Khola Hydropower Project . Journal of Engineering and Sciences, 2(1), 9–13. https://doi.org/10.3126/jes2.v2i1.60371

Issue

Vol. 2 No. 1 (2023)

Section

Articles

License

Copyright (c) 2023 Rukshana Shrestha, Krishna Kanta Panthi, Ghan Bahadur Shrestha

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

CC BY: This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use.