Fault detection and diagnosis for continuous stirred tank reactor using neural network

Authors

  • Ribhan Zafira Abdul Rahman Department of Electrical and Electronics, Faculty of Engineering, Universiti Putra Malaysia
  • Azura Che Soh Department of Electrical and Electronics, Faculty of Engineering, Universiti Putra Malaysia
  • Noor Fadzlina Binti Muhammad Department of Electrical and Electronics, Faculty of Engineering, Universiti Putra Malaysia

DOI:

https://doi.org/10.3126/kuset.v6i2.4014

Keywords:

Fault Detection and Diagnosis, Neural Network, CSTR

Abstract

The paper focuses on the application of neural network techniques in fault detection and diagnosis. The objective of this paper is to detect and diagnose the faults to a continuous stirred tank reactor (CSTR). Fault detection is performed by using the error signals, where when error signal is zero or nearly zero, the system is in normal condition, and when the fault occurs, error signals should distinctively diverge from zero. The fault diagnosis is performed by identifying the amplitude error of the CSTR output error.

Keywords: Fault Detection and Diagnosis; Neural Network; CSTR  

DOI: 10.3126/kuset.v6i2.4014

Kathmandu University Journal of Science, Engineering and Technology Vol.6. No II, November, 2010, pp.66-74

Downloads

Download data is not yet available.
Abstract
799
PDF
817

Downloads

How to Cite

Rahman, R. Z. A., Soh, A. C., & Muhammad, N. F. B. (2010). Fault detection and diagnosis for continuous stirred tank reactor using neural network. Kathmandu University Journal of Science, Engineering and Technology, 6(2), 66–74. https://doi.org/10.3126/kuset.v6i2.4014

Issue

Section

Original Research Articles