Electrical Characterization of Atmospheric Pressure Gaseous Discharge

Authors

  • SR Kandel Department of natural Sciences, School of Science, Kathmandu University Dhulikhel, Kavre
  • DP Subedi Department of natural Sciences, School of Science, Kathmandu University Dhulikhel, Kavre

DOI:

https://doi.org/10.3126/kuset.v4i1.2887

Keywords:

Gaseous discharge, point-plane electrode, dielectric material, filamentary discharge, current and voltage measurement

Abstract

This paper reports the generation of atmospheric pressure gaseous discharge and its electrical characterization. For this purpose, a point-plane electrode system has been fabricated. A high voltage power supply (0-11 kV, 50 Hz) was applied across the electrodes. Discharge was generated with and without the dielectric barrier between the electrodes. The gas discharge was seen as in-homogenous filamentary type discharge without the dielectric. Whereas the filamentary discharge turned into bluish glow when the lower electrode was covered by a dielectric. The current and voltage of the discharge were measured by using a high frequency digital oscilloscope. The power consumed by the discharge was measured from the measured values of current and voltage. A special attention has been paid to investigate the effect of electrode geometry on the nature of the discharge

Key words: Gaseous discharge; point-plane electrode; dielectric material; filamentary discharge; current and voltage measurement

DOI: 10.3126/kuset.v4i1.2887

Kathmandu University Journal of Science, Engineering and Technology Vol.4, No.1, September 2008, pp 81-85

Downloads

Download data is not yet available.
Abstract
705
PDF
482

Downloads

How to Cite

Kandel, S., & Subedi, D. (2010). Electrical Characterization of Atmospheric Pressure Gaseous Discharge. Kathmandu University Journal of Science, Engineering and Technology, 4(1), 81–85. https://doi.org/10.3126/kuset.v4i1.2887

Issue

Vol. 4 No. 1 (2008)

Section

Short Communications

License

This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.