Performance analysis of microcontroller based electronic load controller

Authors

  • Amir Raj Giri Department of Electrical and Electronics Engineering, Kathmandu University, Dhulikhel
  • Bikesh Shrestha Department of Electrical and Electronics Engineering, Kathmandu University, Dhulikhel
  • Rakesh Sinha Department of Electrical and Electronics Engineering, Kathmandu University, Dhulikhel

DOI:

https://doi.org/10.3126/kuset.v13i1.21250

Keywords:

Load control, Microcontroller, Induction generator, Voltage measurement, Current measurement

Abstract

The paper ‘Performance Analysis of Microcontroller based Electronic Load Controller’ is an approach for design, fabrication and performance analysis of microcontroller based ELC for 300 Watt Pico hydro controller. Electronic Load Controller (ELC) is an approach for regulating total power in the system with Pico-hydro power plant. The paper presents a unique method to maintain the system performance by regulating the generated power. The system voltage and current is measured by microcontroller to calculate the consumer power. Based upon the consumer power the dump power is varied accordingly. The performance analysis of ELC unit was done with power source from Nepal Electricity Authority (NEA) grid line as well as with separately excited induction generator under various loading conditions. The different resistive, capacitive and inductive loads were taken into consideration and the performance of the system based on voltage, current and power profiles were obtained.

Kathmandu University Journal of Science, Engineering and Technology

Vol. 13, No. 1, 2017, 20-35

Downloads

Download data is not yet available.
Abstract
615
PDF
733

Downloads

Published

2018-10-04

How to Cite

Giri, A. R., Shrestha, B., & Sinha, R. (2018). Performance analysis of microcontroller based electronic load controller. Kathmandu University Journal of Science, Engineering and Technology, 13(1), 20–35. https://doi.org/10.3126/kuset.v13i1.21250

Issue

Section

Original Research Articles