Simulation of Temperature Stratification in Atriums: Validation of Basic Model Features

Authors

  • Susan Bajracharya Department of Mechanical of Engineering, Central Campus, Pulchowk, IOE, TU, Lalitpur

DOI:

https://doi.org/10.3126/jie.v10i1.10897

Keywords:

Atriums

Abstract

Data on climate conditions, internal temperature conditions and building features were used to deter mine the relative effect of building features on heat gains and losses in a naturally ventilated atrium located at Groningen, Netherlands. Temperature estimates obtained by simulation were compared with measured data. It was found that food estimates of thermal stratification could be obtained by dividing the atrium into horizontal subzones. Mass flow modeling and time steps of less than one hour were found to be important features.

DOI: http://dx.doi.org/10.3126/jie.v10i1.10897

Journal of the Institute of Engineering, Vol. 10, No. 1, 2014, pp. 157–171

Downloads

Download data is not yet available.
Abstract
722
PDF
1167

Downloads

Published

2014-08-03

How to Cite

Bajracharya, S. (2014). Simulation of Temperature Stratification in Atriums: Validation of Basic Model Features. Journal of the Institute of Engineering, 10(1), 157–171. https://doi.org/10.3126/jie.v10i1.10897

Issue

Vol. 10 No. 1 (2014)

Section

Articles

License

The Copyright is held by Journal of the Institute of Engineering, IOE, TU