Analysis of Squeezing Phenomenon in the Headrace Tunnel of Chameliya Project, Nepal

Authors

  • Pawan Kumar Shrestha Department of Geology and Mineral Resources
  • Krishna Kanta Panthi Department of Geology and Mineral Resources Engineering, NTNU
  • Chhatra Bahadur Basnet Norwegian University of Science and Technology, NTNU

DOI:

https://doi.org/10.3126/hn.v13i0.10039

Keywords:

Tunnel squeezing, Headrace tunnel, Chameliya Hydroelectric Project, Tunnel deformation, Support pressure

Abstract

The headrace tunnel of Chameliya Hydroelectric Project, Nepal has faced severe squeezing problems from chainage 3+100m to 3+900m. Due to the severe squeezing and deformation, the tunnel cross section has narrowed considerably along this 800m long tunnel stretch. The tunnel wall closure (deformation) is mostly well over 1 m and the maximum recorded closure exceeds 2m. This paper assesses the squeezing phenomenon along this tunnel stretch through evaluation of rock mass properties and support pressure. Three different methods (two analytical and one 2D finite element numerical modeling program) are used in this analysis. The finding is that it is possible to predict extent of squeezing in tunnel if more than one method is used to verify rock mass mechanical properties. 

DOI: http://dx.doi.org/10.3126/hn.v13i0.10039

HYDRO NEPAL Journal of Water, Energy and Environment

Issue No. 13, July 2013

Page: 44-51

Uploaded date: 3/13/2014

Downloads

Download data is not yet available.
Abstract
1008
PDF
2254

Author Biography

Krishna Kanta Panthi, Department of Geology and Mineral Resources Engineering, NTNU

Associate Professor

Downloads

Published

2014-03-13

How to Cite

Shrestha, P. K., Panthi, K. K., & Basnet, C. B. (2014). Analysis of Squeezing Phenomenon in the Headrace Tunnel of Chameliya Project, Nepal. Hydro Nepal: Journal of Water, Energy and Environment, 13, 44–51. https://doi.org/10.3126/hn.v13i0.10039

Issue

Vol. 13 (2013)

Section

Articles

License

The copyright of the articles and papers published is held by HYDRO Nepal Journal.

The views and interpretation in this journal are those of author(s), and HYDRO Nepal does not bear any responsibility for the views expressed by authors in the journal.